Mount Kit for Jackery Explorer 1000 v2 - Rails or Full Tray, Straps & Stainless Hardware - Power Station Holder -Overland Van RV Camping

Lock your Jackery Explorer 1000 v2 down before the trail does it for you.

The Rail Kit is everything in one box: two scan-fit rails, two 4 ft straps and stainless hardware. Screw the rails down, drop the Jackery in, run the straps, done. No hardware store trip. 🌲 ⚡

These mounts are modeled off a 3D scan of the actual Explorer 1000 v2, not a spec sheet. Each rail cups one end of the unit and its feet drop into matching pockets, so it can't slide, shift or rattle around over washboard roads. Need it at camp? It lifts straight out by the handle and drops right back in.

Want the whole base covered? The Tray Kit is a full 2-piece tray that wraps all the way around the bottom of the unit. The two halves overlap in the middle and screw down as one tray.

Printed here in Michigan from thick ASA, built to take a hot cargo area and years of sun without warping or fading.

Details
- Fits: Jackery Explorer 1000 v2, including the one in the Solar Generator 1000 v2 bundle
- Does not fit the original Explorer 1000, Explorer 1000 Plus or Explorer 1000 Pro
- Rails: about 3.9 x 9.7 in each (99 x 247 mm), 1.8 in (45 mm) tall
- Tray: about 13.8 x 9.7 in (350 x 247 mm) put together, 1.8 in (45 mm) tall
- Built-in strap channel under every piece, sized for 1 in straps
- 4 counterbored screw holes per piece, so the screw heads sit below the floor
- Screws into plywood, a drawer system, a cargo floor or a workbench

In the box
- Rail Kit: 2 rails, two 4 ft straps, 8 #10 stainless steel screws (304)
- Rails Only: 2 rails, 8 #10 stainless steel screws (304)
- Tray Kit: 2-piece tray, two 4 ft straps, 8 #10 stainless steel screws (304)
- Tray Only: 2-piece tray, 8 #10 stainless steel screws (304)

The Jackery and the cargo platform in the photos are not included.

Got a different power station? I'm always scanning new units. Send me a message and let me know what you run. I make mounts for EcoFlow and Anker SOLIX power stations too, they're in the shop.

KodiakForged is an independent shop. Not affiliated with, endorsed by, or sponsored by Jackery. "Jackery" and "Explorer" are trademarks of their respective owners, used only to identify compatibility.

SAFETY AND USE
Off-road and cargo use only: this mount is for secured cargo use, such as the bed of a truck or a secured cargo area, not the passenger cabin or unsecured areas of a vehicle in motion on public highways. You assume all risk and liability for installation and use. KodiakForged LLC is not liable for any damages, injuries, or accidents resulting from use, misuse, or failure. It's your responsibility to keep your cargo safely secured at all times.